|
The in duct air purifier has been designed to make it
easy to provide an odor and germ free environment in your
home or at your commercial premises. You simply attach the
unit into your return plenum and turn on the power to kill
odors, bacteria and mold found in your air ducts. Alternatively,
you can get your air conditioning professional to install
the unit for you.
This unique bulb is 85% germicidal and 15% ozone – this
combination delivers purification and odor control for an
area up to 2,300 square feet. It is easy to operate, simple
to install and virtually maintenance free.
Specifications
- Power: 120V AC
- Ozone output: up to 35 mg/hr
- Bulb rated at 9,000 running hours
- Dimensions: bulb (L) 14”; mounting disk (circumference)
4"; full length 16”
- Weight: 1.4 lb
Safety information
- Do not look at the bulb with the naked eye
- Do not touch the bulb during installation
Parts list
The shipped unit is ready to install and includes:
- (1) 14” bulb
- (1) 4” mounting disk
- (1) ¾” nut
- (1) 12 foot long power cord
- (4) 10x½” sheet metal screws
- (1) 120V AC rapid start electronic ballast
Warranty
One year
Installation instructions
- Find the appropriate power connection for the ID-135,
120V AC. Your connection options include:
a. Bring power from a wall outlet
b. Bring power from the HVAC unit
c. Bring power from the HVAC unit fan
- 2. Using a 1? - 1½” hole saw, drill a hole on the
return side plenum making sure you have the appropriate
clearance for the bulb inside the plenum.
- 3. Place the ID-135 into the plenum, hold it in
place and mount with the self tapping screws.
- 4. Attach the ballast of the ID-135 to the plenum
using self tapping screws.
- 5. Bring power to the ID-135 in duct unit.
Bulb replacement
- Loosen the ¾” nut on the mounting plate and pull
the bulb from the fitting.
- Pull the old bulb from the electrical connector.
Push the new bulb into the electrical connector.
- Push the bulb and connector through the hole in
the mounting plate and tighten the ¾” nut.
|
