|
This is one of our newest and most exciting products.
This compact yet powerful product is placed under-the-counter
and has an optional faucet through which ozonated water
flows into your sink. It is small yet more powerful than
other units in its class and is designed for easy installation
and use. The unit delivers chemical free sterilization of
water and kills microorganisms, including E-Coli, Salmonella,
bacteria, viruses, molds, pesticides and more. It even removes
odors! It is ideal for residential food preparation or anywhere
that sterile clean water is needed. In delivering up to
0.7ppm of ozone concentration in water, it cleans your fruits,
vegetables and meats of bacteria, increases the shelf life
of these products and reduces food wastage due to spoilage.
Specifications
• Power: 120V AC 60 Hz
• Flow rate: 1.5 GPM at 50 PSI
• Max. & min. water pressure: 85 & 25 PSI
• Ozone output: up to 400 mg/hr
• Ozone residual: up to 0.7ppm
• Dimensions: (L) 11.75" (W) 5.5" (H) 4"
• Weight: 4 lbs
Features
• All internal components are UL listed
• Solid-state electronics encased in epoxy
• Simple installation
• Activation as faucet is opened and closed
• Small compact design
• State-of-the-art venturi injector and O3 generator
• Quiet operation
Available Parts List
• (1) faucet & installation instructions
• (1) 120V power supply cord
• (1) 6 Feet of ⅜” tubing
• (1) ⅜” faucet adapter (if needed other sizes are available
at local hardware store)
• (3) ozone present test strips
• (2) mounting screws
• Ozone sprayer wand with instructions
Warranty - One Year
Important Safety Instructions
1. Do not operate this unit if it has a damaged cord or
plug, or after a malfunction.
2. Follow installation instructions.
3. Only use a cold water supply.
4. Inlet water pressure should not exceed 85 PSI with a
minimum of 25 PSI. In-excess of 85 PSI will damage unit
and void the warranty. A water pressure regulator may be
needed (not supplied).
5. If the unit requires servicing, always turn off the water
supply and disconnect the power supply before removing the
unit. Do not try to attempt to repair the unit yourself.
Only qualified service personnel should service this unit
and your warranty will be voided if you open the unit. Contact
your Distributor to arrange for examinations, adjustments
and all other repairs.
Installation Instructions
1. Following the instructions inside the faucet package
to install the faucet to the sink or counter top.
2. Under the sink, locate the cold water supply and it turn
off. Remove the water supply line to the sink at the supply
(angle stop). Install the ⅜ faucet adapter (or a similar
adapter available at your local hardware store) and reconnect
the supply line to the sink.
3. Attach the Vege-Kleen to the side of the cabinet (near
an 115V power supply and water supply - you will need a
dedicated power outlet).
4. Insert the ⅜ tubing into the faucet adapter. Cut the
tubing to size to fit your space requirements and insert
the tubing into the Vege-Kleen IN port which is located
on the side of the unit. Make sure the tubing seats all
the way into the housing.
5. Bring ⅜ tubing from the faucet to the OUT port of the
Vege-Kleen which is located on the opposite side of the
unit to the IN port.
6. Open the water supply slowly and check for leaks. Open
the faucet to purge system.
7. Plug the power cord into the Vege-Kleen and then into
the power supply.
8. Open the faucet completely and allow the water to run
for at least three seconds. Fill a glass with water from
the Vege-Kleen and test the water by dipping the test strip
into the water. Keep the strip in the water for 10 seconds
moving it back and forth (you should smell a small amount
of Ozone). Shake off the strip once, wait 20 seconds and
then you should find that the test strip changes color from
yellowish brown to green. This change indicates the presence
of ozone.
|
